Tab Content
Tab Title
Instructions
Tab Content

Warning: Do not turn the Servos by hand. Doing so can damage the mechanisms inside the Servos.

  1. Pick up each component and examine it closely.
  2. Refer to the video and identify each of the components as one of the following:
  • 1 -Continuous Servo (the big Sservo in the video)
  • 1 Standard Servo (the small Sservo in the video)
  • 1 Red wire
  • 1 Black wire
  • 1 White wire
  • 1 Arduino Uno board
  • 1 USB A to USB type B Cable
Tab Title
Troubleshooting
Tab Content

Servo horn, the top piece attached to the servo, is broken

  1. It is not necessary to replace the horn if it missing a leg or two because hot glue will be used to attach to it anyway. However, you can replace if you’d like to.

Servo horn missing

  1. Attach a horn on the Servo
  2. Or, replace Servo
Tab Title
Implementation
Tab Content
  1. We like to reuse our Sservos as much as possible. This means there are likely bits of glue attached to it from a previous project and possibly even have a broken horn. It’s ok if it’s not brand new.
Instruction Category